Stauf D 3-L: Conductive Dispersion Adhesive for Floor Coverings
What is Stauf D 3-L?
Stauf D 3-L is a conductive dispersion adhesive specifically developed for bonding conductive textile and elastic floor coverings. This adhesive offers a universal application for various types of floor coverings, such as rubber floors, linoleum, PVC, and different types of carpets, including tufted carpets with latex or fleece backing, and needle felt. Stauf D 3-L is designed for use on various substrates, such as cement screeds, anhydrite screeds, chipboards, and OSB boards. The adhesive has high dimensional stability and a short airing time, making it quick and easy to apply. It is also suitable for use with underfloor heating and meets the requirements for castor chairs according to DIN 12592.
How does Stauf D 3-L work?
Stauf D 3-L is applied with a suitable tool, such as a notched trowel, on a prepared substrate. Ensure that no puddles or adhesive nests form during application. The floor covering should be laid within an open time of 5-15 minutes at 20°C and pressed down firmly or rubbed to avoid air bubbles. After 15-30 minutes, the floor covering should be pressed or rolled again to ensure optimal adhesion. For conductive systems, it is recommended to install copper conductive strips underneath the floor covering and connect them according to regulations to ensure effective conductivity.
Advantages and Properties
Stauf D 3-L offers numerous advantages, such as high dimensional stability and good spreadability, allowing for quick and easy application. The adhesive has a low emission value (EC1 plus certified) and is suitable for use with underfloor heating. Additionally, Stauf D 3-L has a conductive resistance of ≤ 3 x 10⁵ Ω according to DIN EN ISO 22636, making it ideal for applications where electrical conductivity is required. The adhesive is load-bearing after 24 hours and provides a strong and durable bond for various floor coverings.
Instructions for Use
Before applying Stauf D 3-L, the substrate must be checked and prepared according to DIN 18365 standards. The substrate must be clean, dry, dust-free, and free of cracks. Apply the adhesive evenly with a suitable notched trowel and avoid puddles or adhesive nests. Lay the floor covering within the open time of 5-15 minutes and press it down firmly. Pressing or rolling again after 15-30 minutes is recommended for optimal adhesion. For conductive installations, copper conductive strips should be centrally placed underneath the floor covering and soldered according to regulations, with connections for grounding by an electrician.
Maintenance and Advice
Stauf D 3-L has a shelf life of 9 months when stored in a dry, cool, and frost-free environment. Ensure that the adhesive is not exposed to frost during transport and storage. Always follow the floor covering manufacturer's instructions and the specific requirements of the construction site for installing conductive floors. For optimal performance, it is important to apply the adhesive within the recommended temperature and humidity limits. If in doubt, consult an expert or refer to the technical documentation for additional information and advice.
- Conductive dispersion adhesive for various applications
- Suitable for conductive floor coverings such as rubber, linoleum, and PVC
- Fast-drying with short airing time and high dimensional stability
- Low emission (EC1 plus) and suitable for underfloor heating
- Easy installation of conductive systems
We strive to handle your order with the utmost care and ship it as quickly as possible. Orders placed on business days before 12:00 PM are usually shipped the same day. However, there may be situations where this is not feasible, for example, when a product is out of stock. In such cases, we guarantee that your order will be shipped within 3 business days. If there is a delay, we will inform you accordingly. Please note that all prices on our website are exclusive of shipping costs.
Shipping Costs:
- Free shipping for orders over:
- €45: Netherlands
- Standard shipping costs:
- Netherlands: €7,95
Delivery: Your order will be delivered by PostNL, DHL, or DPD. While we do our best to ship orders on the same day, we cannot guarantee an exact delivery time.
FAQs
Stauf D 3-L is a conductive dispersion adhesive specifically developed for bonding conductive textile floor coverings. The product is universally applicable and offers high dimensional stability.
Stauf D 3-L is suitable for the conductive bonding of rubber floor coverings, linoleum, PVC floors, tufted carpets with latex or fleece backing, needle felt, and loose-laid carpet tiles.
The adhesive can be used on substrates such as calcium sulfate (anhydrite) screeds, raised floor panels, wooden floors, chipboards, cement screeds, and uncoated gypsum boards.
Stauf D 3-L is very easy to spread, has a short airing time, fast setting, and is suitable for underfloor heating. It also meets the requirements for castor chairs according to DIN 12592.
The consumption of Stauf D 3-L is approximately 300 grams per square meter with a notched trowel size 1 and 400 grams per square meter with a notched trowel size 2.
The open time for Stauf D 3-L is 5-15 minutes at a temperature of 20°C.
The airing time of Stauf D 3-L ranges from 0 to 10 minutes, depending on the ambient temperature and humidity.
Stauf D 3-L should be stored in a frost-free, dry, and cool place. The shelf life is 9 months in a well-sealed package.
Stauf D 3-L has a conductive resistance of ≤ 3 x 10^5 Ω, according to DIN EN ISO 22636.
You can purchase Stauf D 3-L directly from us through our webshop, where we offer a wide range of floor covering adhesives.
